Infinix Hot 10 X682B Frp Unlock with SP Flash Tool
Infinix Hot 10 X682B Frp Unlock with SP Flash Tool
Here is a quick guide to remove FRP lock on Infinix Hot 10 X682B Android Smartphone. If your device is asking to verify Google account after factory reset that means it’s a FRP lock. In that case you need to enter existing Google account credentials. Otherwise, FRP security will not allow you to setup your device. Mostly you will see this lock after performing a factory reset.
Now the question is “how to remove FRP lock without Google account ID and password?” For this enter the correct existing Google account or remove it with pc tool or without pc tricks. If you forget your account credentials then frp bypass is the only solution for you. Yes, there are several ways to unlock FRP without a PC and with pc software and tools.
In our previous post we already shared different FRP tools and tricks for different android smartphones. In today’s guide we are going to talk about Infinix Hot 10 X682B FRP unlocking.
Same as other brands, paid and free Infinix FRP tools are also available. Most of the FRP unlock tools come with a dongle or external box. But if you are using the Infinix Hot 10 X682B model then you are really lucky. For this device, you no need to purchase Infinix frp bypass tools. Free SP flash tool is enough to unlock your device within 5 minutes.
Probably, you may know that Infinix Hot 10 X682B mobile is a MTK chipset based android Smartphone and its firmware comes with scatter and .pac files. Because of this MTK Sp flash tool is a perfect tool for Infinix Hot 10 X682B mobile.
It’s also important to know that nowadays all the latest MTK android phones come with extra security features. Because of this new security layer, older techniques will not help you to unlock FRP on Infinix Hot 10 mobile.
So, before going to bypass FRP lock on Infinix X682B MTK mobile we need to unlock security using MCT MediaTek tool. After that, use the Infinix Hot 10 FRP unlock files, scatter file, Auth file and start the FRP unlocking process.
If you are new and don’t know how to do that follow the below instructions properly. First off, download all the Infinix Hot 10 X682B FRP unlocking file tools on your desktop and then start the unlocking procedure properly.
Download Infinix Hot Google Account Unlock Files, Tools
MCT MTK Bypass Tool : DOWNLOAD / MIRROR
libusb win32 devel filter 188.8.131.52 And MTK USB Driver : DOWNLOAD / MIRROR
SP Flash Tool With DA And Auth File : DOWNLOAD / MIRROR / MIRROR
Infinix Hot 10 X682B scatter file + Frp File : DOWNLOAD / MIRROR / MIRROR
Unlock Infinix Hot 10 X682B After Factory Reset ( Remove Google Account)
Screen lock (pattern/PIN) and FRP lock are too different from each other. Because of this phone unlocking process are also too different. Here in this guide we will show you how to remove FRP lock on Infinix Hot 10 after factory reset.
Step 01 Configure Tools And Files
- Download all the files and extract them on desktop using any unzip software. (Infinix Hot 10 X682B scatter file + Frp File, SP Flash Tool with DA & Auth file, libusb win32 devel filter 184.108.40.206 and MCT MTK Bypass Tool)
- Install the libusb win32 devel filter 220.127.116.11 then reboot your pc. Skip the step, if already installed.
For a detailed guide check “how to install libusb win32 devel filter on pc?”
Step02 Disable Protection using MCT_MTK_BYPASS Tool
Now, enter into the extracted MCT_MTK_BYPASS folder >>> run “MCT_MTK_BYPASS.exe” and Click on BYPASS button.
Please Note: To use this tool, libusb win32 devel filter 18.104.22.168 drivers should be installed on your pc.
- Next, power off your phone and then connect it with pc by pressing the “Volume Up” + “Down” key at the same time.
- Wait for a few seconds and the tool will show the “Disable Protection” message in the log window.
Step 03 Unlock Infinix Hot 10 FRP Lock Using SP Flash Tool
- Enter into the Extracted “SP Flash Tool With DA And Auth File.rar” folder and run the “Sp flash tool” as administrator.
- Click on the “choose” button from “Download-Agent” section and Select MTK_AllInOne_DA_mt6765_mt6785.bin File from the same Flash Tool Folder.
- Again, click on “choose” from “Scatter-loading file” section and select MT6768_Android_scatter.txt file.
- Same as above, click on Authentication File and Select auth_sv5.auth File from Flash Tool Folder.
- Now, go to “Option” tab >> “Connection”” and Set Com Port (COM:3) (choose it according to your connection) and Baud Rate (921600)
- Navigate to “Format” Tab and select the “Manual Format flash” option.
- Change the Begin Address[HEX] and Format Length[HEX] with below values.
Tips : You may also use the free MTK pattern unlock address tool to get frp unlock code for any MTK android phone.
- Next click on the “Start”/ “play” button to start unlocking the process.
- Turn OFF your Phone >> then Press and hold Volume Up + Down and Insert USB Cable.
- Wait for a few seconds to detect your device and the tool will format the device automatically.
- Done!!! Reboot the device and this time device will not ask your enter pattern lock or pin password on your mobile including FRP lock.
These are the steps to unlock MTK Infinix Hot 10 X682B android phone without Google account verification. Use the custom DA file and auth file with SP flash tool and remove factory reset protection on Infinix Hot 10 X682B mobile.
All the tools, frp files are fully tested and working at the time of posting this post. In case, if it’s not working for you or getting any issue then please write in the comment section.