Last updated on April 20th, 2018 at 07:36 am
Q Reach Allure Speed Flash File MT6735 – How To Flash
Here is a quick detail flashing guide for Q Reach Allure Speed MT6735 with Q Reach Allure Speed Flash File. No need to go anywhere to search stock rom for Q Reach Allure Speed MTK chipset based android mobile. Download Q Reach Allure Speed flash file from download section and follow the steps to flash Q Reach Allure Speed using Sp flash tool.
All Q Reach Allure Speed flash file, drivers and Q Reach Allure Speed flash tool are listed below. Click on required files and flash firmware on Q Reach Allure Speed marshmallow android mobile without any dead risk. This post will help you to unbrick Q Reach Allure Speed mobile at your own home. Forget service centre to repair Reach Allure Speed phone, no matter what’s the problem you are facing on your device.
If you have any software related issues on Q Reach Allure Speed mobile then flash official stock rom on Q Reach Allure Speed MT6735/MT6580 to unbrick it again.
Remember, make sure you have only software related issues or you want to upgrade or downgrade Q Reach Allure Speed mobile. This method will not work if you have any hardware related problem.
So if you are ready to flash firmware on Q Reach Allure Speed MTK MT6735 / MT6580, follow the instruction as it is.
Flash rom on Q Reach Allure Speed using Sp flash tool is very simple but one wrong step may brick your device permanently. So do it on your own risk. We and our site will not be responsible if anything goes wrong with your device.
Download Q Reach Allure Speed Flash File, Drivers & Tool
[Check Device Chipset and Download flash File]
How To Flash Q Reach Allure Speed
In order to flash Q Reach Allure Speed Smartphone, download all necessary flash file, driver and tool from above download section. Once all the pre-requirements are done, go ahead for flashing instructions.
- First of all download Reach Allure Speed Flash File or firmware & extract the zip file on pc.
- Second, install Reach Allure Speed drivers [VCOM] on pc. [if already installed, skip the step]
- Extract the downloaded Sp Flash Tool Zip file on pc and “Run” The Sp Flash Tool as shown in screen shot.
- Click on“scatter- loading” button and select the scatter.txt file [MT6735_Android_scatter.txt] from the downloaded firmware.
- Sp flash tool will load all necessary files automatically.
- Click & check mark on all option because we are flashing the complete firmware.
- Go to flashing options and set it as “Firmware Upgrade”, see screenshot.
- Next, click on “Download” button from top of the tool.
- Come to your device and remove the battery from your phone and don’t insert it again[if battery is built in then don’t worry, just power off it properly]
- Connect device with pc via USB cable and don’t move it in between the firmware flashing process.
- Flash tool will detect your phone automatically, if not then press & hold volume up or volume down key to trigger your phone.
- Driver installation will start automatically. Wait to update drivers.
- Process will start and will take few minutes to flash firmware on Q Reach Allure Speed marshmallow.
- In the end of process, you will see a “Successful” message on SP Flash tool.
- All Done!!! You have successfully flashed stock rom on Q Reach Allure Speed mobile without dead risk.
This is all about how to flash Q Reach Allure Speed MTK 6735 & M6580 chipset based android mobile? Sp tool is the best tool to flash any mediate android device.
It’s an universal method to flash any scatter based firmware and specially for MTk android mobiles.
Hope this guide will help you to unbrick your Q Reach Allure Speed by flashing official firmware.
I am Jagmohan Singh Negi A Tech Enthusiastic Person. I always want to explore something new and experiment on Android Smartphones, here on 99mediasector.com i share solutions of Latest Android Bugs and Their Fixes, Latest Android launches, and How-to-Type Solutions for All Android Smartphones.