Root Samsung Galaxy J2 Prime Sm G532G & Install TWRP Recovery [100% Working]
This root guide will help you to root Samsung Galaxy J2 Prime Sm G532G marshmallow version.Samsung j2 prime is mid range smartphone for all samsung android phone lovers.By default it comes with upgraded android 6.0.1 marshmallow version.
So if you are looking a safe way to root samsung galaxy j2 prime SM G530G without pc then we can assure you that you are on right place and after reading this post you can get root access on Samsung Galaxy J2 Prime Sm G532G safely.
Samsung galaxy j2 prime is very good smartphone in its price segment but if you think now your device is junked with unwanted third party apps like system apps or pre-installed apps then rooting is a single way to get ride over these types of problems.Same as if you are a advanced user and want to use your device with full potential or want to customise your device then root your Samsung Galaxy J2 Prime first and change stock ROM to custom ROM,change IMEI numbers for android tweaks ,change Recovery ,increase ram ,increase battery life etc.
Now if you still want to root Samsung Galaxy J2 Prime Sm G532G marshmallow version then follow our root guide properly to root samsung j2 prime and install twrp recovery .
Quick Points Before Root Samsung Galaxy J2 Prime Sm G532G
- We will use ODIN flash tool on pc.
- Warranty will voids after rooting.
- Stable without any issue.
- Can’t Root Samsung Galaxy J2 Prime Sm G532G without pc.
- First install twrp recovery on Samsung Galaxy J2 Prime Sm G532G
- Twrp recovery will be use to flash super-su file to get root access on Samsung Galaxy J2 Prime Sm G532G
How To Root Samsung Galaxy J2 Prime Sm G532G 6.0.1 Marshmallow Version
There is two major steps to root Samsung Galaxy J2 Prime Sm G532G marshmallow version.
- First we will install TWRP recovery on Samsung Galaxy J2 Prime Sm G532G
- After that we will flash super-su file to root Samsung Galaxy J2 Prime Sm G532G
Step 01 Pre-Requirements
- Take backup of your phone data like message,contacts,photos & videos.
- Charge your phone aprox 60%
- Data cable or USB cable to connect your phone with pc.
Step02 Download and setup
- Download Samsung USB drivers & install it on your pc.
- Download Latest ODIN pc tool for pc.
- Download TWRP recovery file to install TWRP recovery on Samsung galaxy j2 Prime marshmallow version .[15Mb Size]
Alternate Twrp recovery file
- Download Supersu file and place it on phone storage. [4Mb Size]
Step 03 Enable USB Debugging & OEM unlock
- To enable developer option go to your phone setting>> About phone.
- Tab on build number option for 7 times .now you will get the message “you are now a developer”.
- Go back again and enter into the “developer”
- Now find the “USB debugging” option and enable it.
- Same as you will see the “OEM” option then enable it.
- Make sure you don’t have factory reset protection enabled in your Google Account otherwise you may never be able to boot again.
Step 04 Boot Samsung Galaxy j2 Prime Into Downloading Mode
- Switch off your phone first.
- Now press & hold Power+Volume Down +Home key together.
- Here you will see a warning message on screen.
- Press Volume Up key for once.
- Now you will be into “Downloading Mode” option.
Install TWRP Recovery On Samsung Galaxy J2 Prime Sm G532G
Click here to read full detail post to Know how to use ODIN pc tool to flash recovery and root samsung devices?
- Make sure Samsung USB drivers are installed on pc.
- Make sure USB debugging is already enabled on your phone.
- Make sure your pone is into downloading mode.
- Now copy the downloaded TWRP recovery file and place it on pc.
- Now open the download ODIN on your pc and run the ODIN exe file.
- Now again connect your phone with pc via USB cable.[Phone should be into downloading Mode]
- Now you will see the message “ID:COM:” in odin that means phone is connected properly and you are ready for next step.
- Click on “AP” or “PDA” option and browse the TWRP recovery file.
- Now click on “START” button and run the process.
- If everything is OK then you will see a green “PASS” message on odin. That means TWRP recovery has been installed on your phone.
Now phone will reboot into twrp recovery automatically. If not then you can check TWRP recovery is properly installed or not by entering into recovery mode manually. Just power off >>Press & hold Volume Up+Home+Power key together and boot into recovery mode.
Flash SuperSu File To Root Samsung J2 Prime
After installation of twrp recovery now you are ready to flash supersu file to root your device.now follow the steps one by one.
- NowDownload SuperSu File and move it into your phone memory.
- Now disconnect your phone with pc and switch off it properly.
- Now press & hold Volume up+Home+Power key together and boot your phone into recovery mode.
- SelectWipe->Advance Wipe->Select Cache Data.
- Now go back to main Menu & select “Install” option.
- Browse the Downloaded Supersu file .which you placed into the phone storage.
- After selecting the SuperSu file just swipe the button to flash the root file.
- It will take few minute to flash the supersu file.
- Now go to “System” and reboot your device normally.
- All Done!!! Now you have rooted Samsung Galaxy j2 Prime Sm G532G in your hand.
Check Root Status
After rooting your Samsung galaxy j2 prime without pc now its the time to know is it properly rooted or Not? Download root checker app from play store and install on your device and then launch the app.here you can see a message “congratulations ,you device is rooted now”.
This is all about “how to root and install twrp recovery on samsung j2 prime SM G532G 6.0.1 marshmallow version?”now you can perform many task on your rooted samsung j2 prime like can install custom rom,can increase RAM,can increase internal storage abd also can increase battery life of your device.moreover you can change device id ,change imei number and android id etc for unlimited earning.
Till now if you have any problem regarding this post then feel free to ask us by leaving your valuable comments.we will try to solve it for you as soon as possible.