Firmware upgrade encountered an issue.Please Select recovery mode in Kies & try again

Fix Error Firmware upgrade encountered an issue Please select recovery mode in Kies & try again




Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.”is it your problem?if yes ,then no need to worry about your Samsung .we will show you why you are getting this problem and how to fix Firmware upgrade encountered an issue Please select recovery mode in Kies & try again error on your Samsung android device.

Why This Problem Accrue?

If you are new for rooting and really don’t know what you are doing with your device then you may face this type of problem. It could be just because of Rooting, installing a new ROM or custom ROM or at the time of updating your Samsung android device. Main reason for this error is – USB debugging was not enable on your Samsung android phone and you was trying ODIN3 for any reason lie flashing a new ROM or Custom ROM etc.

Rooting your android is not dangerous, if you are using proper method with proper supported files. Otherwise any wrong step may brick your Samsung android phone.

If you are using Kies pc suite or ODIN3 to update your Samsung or trying to flash new custom ROM or Stock ROM and your phone stuck at screen which says “Firmware upgrade encountered an issue Please select recovery mode in Kies & try again” that means you are using wrong method or wrong files .after that every time if you try to update or downgrade your Samsung device, it will stuck in boot and you will see error on your phone.

So now in this post we will show you how to fixFirmware upgrade encountered an issue Please select recovery mode in Kies & try againerror and unbrick Samsung android device.

Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again

How TO Fix Firmware Upgrade Encountered An Issue Please Select Recovery Mode In Kies & Try Again ?

At the time of booting if your Samsung logo stuck and displaying error “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again” then you can fix this error by following two different methods

1.Fix Firmware Upgrade Encountered An Issue Error By Using Kies

2.Fix Firmware Upgrade Encountered An Issue Error By Using ODIN3

METHOD 01

Watch video How To Fix Firmware Upgrade Encountered An Issue Error By Using Kies

Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again

1.Fix Firmware Upgrade Encountered An Issue Error By Using Kies – if you are facing this error on your Samsung device then we recommended you to use Kies Pc Suite to fix this error .because this error accrue when USB debugging is not enable on your Samsung phone and you are trying ODIN3 software to update your phone. So if usb debugging is not enabled then use Kies pc suite.Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again

Requirements :

  • Kies Pc Suite.
  • USB cable.
  • Internet
  • Note down Samsung Model Number and S/N number.

Now follow the steps one by one and unbrick Samsung android phone.

  • At first de-activate the antivirus on your pc, if you are using.
  • Now remove battery and note down MODEL number & S/N [serial number] from the back panel of your phone as shown in screenshot. We will use it in next step.

samsung model number serial number

  • Now RUN Samsung Kies on pc.
  • Navigate to “TOOL” option & click on “Firmware Upgrade andInstallation” tab as shown in screenshot.

Samsung Kies Not Detecting Android

  • Now a window will open up, just type your Samsung Model number and click “OK”.

enter samsung model number

  • Now it will ask you for serial number. Just type your Samsung phone serial number.

enter samsung serial number

  • Now follow the instructions properly.[make sure till now phone is not connected with pc]
  • When you will see this type of window then Connect Phone with PC via USB cable [ Don’t Attach Battery with Phone]

samsung software upgrade and installation

  • Now click on “Start Upgrade” button. Update process will start automatically.
  • Now Samsung Kies will try to detect your phone and will start updating the USB driver automatically. It may take few minutes to complete the process. At the same time your phone will be ON automatically.[install Samsung USB driver If Required]

Firmware upgrade encountered an issue.Please Select recovery mode in Kies & try again

  • Now process will start and it will take long time to update your phone software .processing time depends on your internet connection speed.
  • After few minute you can see downloading process will start on your phone. Don’t remove the USB cable in between the process.
  • After completing the process your phone will try to boot in normal mode.
  • Just remove the cable and attach the battery with phone and try to boot your phone normally.
  • 100% SUCCESS!!!! This time your phone will start normally.
  • All done.

Now error”Firmware upgrade encountered an issue Please select recovery mode in Kies & try again” should be removed from your Samsung android phone. Remember this process will erase all user and phone data.

METHOD 02

2.Fix Firmware Upgrade Encountered An Issue Error By Using ODIN3– as i told you if you are facing this problem on your Samsung phone then Method 01 is the best way to remove or fix Firmware upgrade encountered an issue Please select recovery mode in Kies & try again error .because if you want to fix this error by using odin3 then USB debugging should be enabled on your Samsung phone. Without enabling USB debugging odin3 cant synchronize your phone and process will not complete in any way.

So make sure USB debugging is enabled on your Samsung phone .if YES !!! then move on this method otherwise use only method01.

Requirements

  • Odin3 latest version.
  • Download & Install Samsung USB driver in PC.
  • Stock ROM/Firmware for Samsung device.[remember use only original stock ROM for particular device]

Now follow the steps one by one and unbrick Samsung android phone .remember this method will work if USB debugging is enabled on your phone.

  • At first Run Odin3 on your pc .
  • now remove the battery for once and attach it again and boot your phone into Downloading Mode.
[power off your android>> Press and hold “Home +powr+volume Down” buttons until you get a warning screen.]
  • As you see warning screen press Volume-Up key and you will see a new screen on your phone as shown in screenshot.

root samsung j1 ace

  • Now connect your phone with pc via USB cable.
  • As you connect your pc with phone ,odin will detect your phone and you will see “ADDED!!”” in odin window.
  • Now click on “AP” or “PDA” button and browse your “Stock ROM”/”Firmware” from pc .

Install TWRP Recovery On Samsung Devices Using Odin,odin,samsung twrp

  • Now click on “START” button and flashing process will start automatically.
  • Remember don’t touch your phone or USB cable.
  • If everything is ok then you will see a big Green Box saying ”RESET” or “PASSED”.that means stock ROM flashed on your phone and you can remove it from pc.

odin 3

  • Now boot it in normal way and you will get your unbricked Samsung phone in your hand.

Above both methods is the best way to remove Samsung error “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.”

So just follow the all steps one by one and fix this error.till now if you get any problem to perform this task then please feel free to ask us.we will try to resolve your problem as soon as possible.

Incoming search Terms:

Firmware upgrade encountered an issue error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again unbrick samsung phones fix error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again samsung display warning message Firmware upgrade encountered an issue

Share on Google+Flattr the authorShare on FacebookShare on StumbleUponEmail this to someoneShare on LinkedInPin on PinterestShare on TumblrTweet about this on TwitterBuffer this page

Leave a Reply

Your email address will not be published. Required fields are marked *