Moto G7 Play XT1952-2

Motorola Moto G7 Play XT1952-2 Flash File And Tool

Android Download Firmware MOTO

Download Motorola Moto G7 Play XT1952-2 Flash File And Tool

Do you have Moto G7 Play Smartphone and now want to install stock Firmware? If yes then this guide is for you. Moto G7 Play how to flash guide will help you to unbrick your own Moto G7 Play mobile again.

In this guide we will show you all possible methods to install stock Firmware on Moto G7 Play XT1952 without unlock bootloader and with locked bootloader. Just download official stock ROM for Moto G7 Play XT1952 from below download section and flash it with flash file or using Moto flash tool.

Both added firmware installation process are 100% working and tested for Moto G7 Play XT1952-2 model. Simple instructions are enough to restore official stock firmware on Moto XT1952-2 mobile.

Probably you may know that Moto G7 Play XT1952 is Qualcomm chipset based android Smartphone. So here we use Motorola flash tool or Motorola flash script for flashing.

In case you are facing any software related issues on Moto G7 Play XT1952 Smartphone then firmware installation is perfect solution for you. After installing new software, it will fix almost all software related issues automatically. That means, now you no need to go anywhere to repair your device.

Motorola Moto G7 Play XT1952 how to flash stock Rom method is very easy for any newbie user and advanced android users. Just download flash file for Moto XT1952-2 Play 7, drivers, tool and follow the desired flashing method.

Important : Before going to jump into Moto G7 Play stock ROM flashing process, it’s must to know that Moto G7 Play comes with different model numbers. That’s way their flashing files may be different for different models. Here we are providing official stock Rom for Moto G7 Play XT1952 – 2 model. So make sure you are also going to flash the same device. Otherwise, it may lead to brick your device permanently.

Download Moto G7 Play XT1952-2 Flash File , Drivers And Tool

Motorola Moto G7 Play XT1952-2 Flash File [ Stock Firmware ]

Motorola_Moto_G7_Play_XT1952-2_CHANNEL_RETBR_9.0_PPY29.105-134_CID50

Android 9 Version

DOWNLOAD

 

Motorola_Moto_G7_Play_XT1952-2_CHANNEL_PPY29.68-28_CID50.zip

Android  Version 8.0

DOWNLOAD

 

Motorola_Moto_G7_Play_XT1952-2_CHANNEL_RETBR_9.0_PPY29.68-28_CID50.zip

Android  Version 9.0

DOWNLOAD

RSD Lite Moto Flash Tool : All Versions

RSD_Lite_v6.1.4  DOWNLOAD 01 Or DOWNLOAD 2
RSD_Lite_v6.1.5 DOWNLOAD 01 Or DOWNLOAD 2
RSD_Lite_v6.1.6
DOWNLOAD 01 Or DOWNLOAD 2
RSD_Lite_v6.0 DOWNLOAD 01 Or DOWNLOAD 2
RSD_Lite_v5.9 DOWNLOAD 01 Or DOWNLOAD 2

Download Motorola USB Drivers : DOWNLOAD

How To Flash Moto G7 Play XT1952 – 2  Stock ROM

All the listed Moto G7 Play XT1952 flash files are Moto G7 Play XT1952 fastboot ROMs. So you no need to unlock bootloder of your device before flashing. Motorola Moto G7 Play XT1952 fastboot Rom can be flash using Motorola RSD Lite flash tool or Moto flashing script [ included with fastboot ROM].

Method01 Install Stock ROM On Motorola G7 Play XT1952-2 Without Tool

Official Motorola Moto G7 Play XT1952-2 Fastboot stock firmware comes with flash script. So users can flash Motorola XT1952-2 without any Moto flashing tool.

  • Install “Mototola Universal USB Drivers” on windows pc.
  • Download and extract the Moto G7 Play XT1952 firmware zip file on pc.
  • Come to the device and boot it into “Bootloader mode” by pressing hardware keys.
  • Connect the device with pc via working USB cable into bootloader mode.
  • Now find and run flashfile.bat file to beign the flashing process without tool.
  • Now flashfile.bat file will run all fastboot commands to flash android OS on Moto G7 play Smartphone.
  • Here it will take few minutes to flash complete stock ROM files.
  • End of the successful process, remove USB from the device and reboot it normally.
  • Done!!!

In this way users can install official stock ROm on Moto G7 Play XT1952-2 without applying fastboot commands and Moto flash tool. Motorola flashing script will execute all the required firmware flashing fastboot commands automatically.

Method 02 Flash Moto G7 Play XT1952-2 Stock Firmware Using RSD Lite Tool

In case you are facing any difficultly to flash Moto G7 Play XT1952-2 using fastboot commands then use free Moto RSD Lite tool. RSD lite moto tool is one of the best and reliable flash tool for all Motorola / Moto android devices.

  • Download and install “Motorola USB drivers” on pc. Drivers installations is must to create bridge connection in between phone and pc. Skip the step, if drivers are already installed.
  • Extract the downloaded Moto G7 Play XT1952 firmware file on pc.
  • Download RSD Lite Tool zip file, extract it on pc. And Launch “RSD lite Software” on pc as administrator.
  • Click on “BROWSE” button and load flash file from firmware folder which you want to flash on your device. It will show flashing file automatically. Choose anyone.

  • After successfully adding the file, you will see the complete file’s properties in right side log window as shown below.
  • Come to the device, power off and boot your moto mobile into “fastboot mode” or “bootloader mode” manually.
Power Off >> Press & Hold Volume Down key + Power Key at the same time. [ Universal Method For All Motorola Phones]
  • Connect the device with pc via working USB cable.
  • If the device is properly connected with pc, tool will detect the device and will show USB Port connected status in device list area.

  • Finally hit on “START” button to start firmware flashing process on Motorola phone using RSD lite software. Flashing process will take approx 5-10 minutes and will depend on firmware file size. So sit back and wait to complete the flashing process.
  • End of the successful firmware flashing, you will see the “Finished” message under the “STATUS” option.
  • Unplug USB cable and reboot the device manually.
  • DONE!!!

 

Moto G7 Play XT1952-2 FRP Bypass Tool

Important : If you were using any Google account on the same device then device will stuck on Google account verification screen. Enter the existing Google account credentials to remove Google FRP lock. Otherwise, use Motorola FRP Unlock Tool to remove FRP on Motorola Moto G7 Play XT1952-2 mobile.

 

This is all about how to flash Moto G7 Play XT1952-2 without tool and with tool? Simple and easy methods can be use to unbrick or unroot Moto G7 play mobile. Just download Moto G7 Play XT1952-2 flash file, tool and apply the described flashing method for successful stock ROMs installation.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.