Moto xt1033 Flash File

Moto xt1033 Flash File And Tool – Flash Moto G xt1033 Firmware

Moto xt1033 Flash File And Tool – Flash Moto G xt1033 Firmware

Hello guys, once again we are here with another Motorola flashing guide and today we are going to discuss about Moto xt1033 Flash File and Tool. Here in this tutorial we will show you “how it’s easy to flash Moto xt1033 Flash File without any premium flash tool?” It’s really very easy and safe method to flash Motorola G XT1003 smartphone within few clicks.

First off all download Moto Xt1033 flash file, Moto XT1033 Flash tool and drivers on pc and then follow the below firmware flashing instructions as shown below.

If your device bricked or getting any software related issues on the device then firmware flashing will fix all issues automatically. So, no need to go anywhere to learn Motorola XT1033 Moto G 1st generation stock rom flash process. We will describe all the steps with all necessary screenshots.

How To Flash Moto G XT1033 Flash File Using RSDLite Tool

As we already told you, it’s an easiest method to install stock ROM on Moto G XT1033 using free RSDLite Tool. Just load the correct firmware on the tool and boot the device into fastboot mode and start firmware installation process.

  • Install Motorola USb drivers on pc. [DOWNLOAD]
  • Download Motorola XT1033 stock ROM [Flash file] and save it on pc.

Moto XT1033 Moto G Flash File : DOWNLOAD / MIRROR


 

  • Download & Extract the downloaded “RSDLite 2.4.zip” file >> Open folder and run “RSDLite6.2.4.msi” file to install it on pc. [Follow on screen instructions to install RSDLite tool]

Download RSDLite Tool : DOWNLOAD / MIRROR

  • After installation of tool, you can find shortcut on desktop. Open and launch the tool on pc.

RSD lite tool

  • Once the tool launch, click on three dots and load “Moto xt-1033FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xml.zip” file from pc as shown below.

flash moto xt1033 flash file

  • Next, click on “Decompress Only” button to extract the firmware file automatically.

  • Now come to the device and boot it into “Fastboot Mode” manually.
Fastboot Mode: Power Off >> Press & Hold volume Down key + Power Key together at the same time and device will boot into fastboot mode/Bootloader mode.

moto g xt1033 fastboot mode

  • Plug USb cable and attach the device with pc and it will create “Motorola ADB Interface” under the “Device Manager”.

  • Finally come to the tool again and hit on “STAR” button to start Moto XT1033 flashing process. Here it may take few minutes to flash complete firmware.

After flashing firmware device will reboot and you have to setup the device again as a new device. All done!!! you have installed official firmware on Moto XT1033 mobile.

Alternative Method

Flash Moto XT1033 Motorola G Using Script [ Fastboot ROM]

This is an another method to flash Moto XT1033 flash file using commands. Here in this method we will flash Moto G XT1033 fastboot rom using fastboot commands.

  • Install Moto USB drivers On pc.
  • Download and extract the Moto G XT1033 fastboot Flash file on pc.

Moto XT1033 Fastboot Flash File : DOWNLOAD / MIRROR

  • Download fastboot commands file on pc. [Extract on pc]

Moto Xt1033 Flashing File [.bat] : DOWNLOAD / MIRROR

  • Now copy the extracted Moto XT1033.zip files and transfer the “Moto XT1033.bat” file into extracted firmware folder. [Both Firmware files and XT1033.bat file must be into same folder]

  • Come to the device and boot it into bootloader/fastboot mode by using hardware keys.
Fastboot Mode: Power Off >> Press & Hold volume Down key + Power Key together at the same time and device will boot into fastboot mode/Bootloader mode.
  • Plug USb cable and attach the device with pc and it will create “Motorola ADB Interface” under the “Device Manager”.
  • Again go to main folder and run “Moto XT1033.bat” file as administrator and will start flashing process automatically.

flash moto g xt1033

  • Device will reboot automatically after flashing firmware.
  • Setup the device again as a new device and boot device into new installed Stock android ROM.

Please Note: Device may stuck on “google account verification” after flashing firmware, if you were using any Google account on the same device. Enter the correct existing password to remove Moto g XT1033 FRP lock.

In case, you don’t have Google account and password then follow the below guide to remove Moto FRP lock without pc and with pc.

This is all about “how to flash Moto Xt1033 flash file [Stock ROM] using tool and without tool?” Till now getting any issue on any device, please leave your comment below.

4 thoughts on “Moto xt1033 Flash File And Tool – Flash Moto G xt1033 Firmware”

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.