Flash YDW U52 Official Firmware | Flash Tool | Official firmware –Guide

Flash YDW U52 Official Firmware | Flash Tool | Official firmware : Here is a guide to flash YDW U52 official firmware using Sp flash tool. If you are using YDW U52 and now want to install stock Rom on YDW U52 mobile then follow the tutorial as it is to flash YDW U52 official firmware. No need to go anywhere to update software of your own YDW U52 device. You can download YDW U52 official firmware [Stock ROM] and flash tool from below download section.

Benefits To Install Stock ROM On YDW U52

If you are getting any type of software related issues on YDW U52, just flash ROM again and fix all problems quickly. Moreover, by flashing stock firmware on YDW U52 we can fix bootloop on YDW U52, upgrade or downgrade android version, fix hanging problem and unbrick YDW U52 without going to repairing centre. That means you can remove all type of issues by flash YDW U52 official firmware at your own home.

About YDW U52 Smartphone

YDW U52 is a latest Smartphone powered by latest android version 7.0 and very soon may update on Oreo v8.0. YDW U52 mobile is a MTK [MediaTek] chipset based android mobile. Chipset series is MT6737M. Moreover, YDW U52 comes with Dual SIM connectivity, Wi-fi Accelerometer, Ambient gentle sensor and Goryo proximity Gravity sensor etc.

AboutHow Flash Stock ROM On YDW U52 official

Device Name – YDW U52

Android Version – Android v7.0

Chipset -MT6737M

Firmware Type – Official YDW U52 firmware or Stock ROM

Flash Tool – Sp Flash Tool

Stability – Stable Without Any Issue

Important Points Before Flash YDW U52 Official Firmware

  • Firmware is only and only for YDW U52 device. Don’t try to flash it on any other device.
  • Apply all the steps as shown in below guide. One wrong step may brick your device permanently.
  • Flash process will wipe all user data and phone data completely.
  • Charge your device approx. 50-60% to avoid accidental power off in between flashing process.
  • We and our site will not be responsible in any how condition. So do it on your own risk.

Obtain equipment & Official ROM For YDW U52

VCOM Drivers

Firmware Flash Tool

YDW U52 Official Firmware

How To Install Stock ROM On YDW U52

In order to flash or install stock Rom on YDW U52, you have to download YDW U52 firmware, YDW U52 flash tool and drivers from above download section. Once you are ready with all pre-requirement go ahead for flashing procedure. Follow all the instructions as it is for successful firmware update.

Here in this flashing method we will use Sp flash tool to flash YDW U52 firmware.

Steps to flash YDW U52 official firmware

  • Download and install VCOM drivers on pc or laptop.
  • Click on above YDW U52 official firmware link and download firmware first.

YDW U52 firmware

  • Extract the downloaded firmware zip file [H921BE_V1_D_YDW_X5_D_V01_20171107] on desktop.

official YDW U52 firmware

  • Firmware Folder Contain with scatter [MT6737M_Android_Scatter.txt] file.

\YDW U52 scatter file

  • Next, extract the downloaded Sp flash tool on pc and run “flash tool.exe” file as administrator.

unbrick MTK android phone using sp flash tool

  • Navigate to “Download” Tab, Click on “Scatter-loading” option and browse the “MT6737M_Android_Scatter.tx” file from downloaded firmware folder.

  • Check mark to all the options as shown in below screenshot. [Make sure all options are selected]

  • Select “Download Only” option from drop down section.

  • Hit on “DOWNLOAD” button from top of the flash tool.
  • Power off your device properly, connect it with pc via USB cable.
[If device is not detected by pc, apply different key combinations as a boot key]
  • As soon as device is detected by tool, flashing process will start automatically.
  • You can see flashing process bar on flash tool.

  • Wait to complete flashing process. It may take approx. 5-10 minutes to flash complete ROM.
  • After completing the process, you will see a Successful message on tool window.

  • All done!!! Unplug your device from pc and reboot it normally.

Please Note – Reboot may take long time in it’s first normal boot. So sit back and wait to reboot it automatically.

Congratulations!!! You have successfully flash official firmware on YDW U52 using Sp flash tool. Now you are ready to setup your device again without any issue. Flashing process will fix all software issues, bootloop problem on your bricked YDW U52 mobile.

That’s all about how to flash YDW U52 Official Firmware using Sp flash tool?

Hope this guide may work for you to unbrick YDW U52 Smartphone. Stay tune with us for more tutorial about to root and install twrp recovery on YDW U52 nougat mobile.

Jagmohan Singh Negi

I am Jagmohan Singh Negi A Tech Enthusiastic Person. I always want to explore something new and experiment on Android Smartphones, here on 99mediasector.com i share solutions of Latest Android Bugs and Their Fixes, Latest Android launches, and How-to-Type Solutions for All Android Smartphones.

Leave a Reply

Your email address will not be published. Required fields are marked *