How To Bypass Vivo Y93 FRP Using Sp Flash Tool

Android Download FRP Tools Tricks Vivo

How To Bypass Vivo Y93 FRP Using Sp Flash Tool

Recently we published a post to remove Vivo Y93 frp lock using vivo format and frp tool. In that tool you can enable debugging frp locked vivo y93 mobile and then can bypass FRP lock and pattern lock at the same time.

But if you are trying to find another method to unlock vivo y93 then sp flash tool is wonderful tool which will help you to unlock your device without any issue. Simply download Vivo y93 frp file, frp code and unlock factory reset protection using Sp flash tool.

Before going to jump into Vivo frp unlock using Sp flash tool procedure, its must to know that its little bit hard in comparison of using vivo frp tool. But don’t worry; we will try to explain each and everything with all necessary screenshots.

As we all know we can unlock pattern lock or pin lock by factory reset. But the problem is that its not possible with Vivo devices. If devices is locked then it will ask you enter correct pattern lock or PIN password to unlock recovery mode of the device. Same as, if you have any Google account on the same device, it will stuck on Google account verification screen after factory reset. For this, you have option to unlock frp on Vivo y93 using Sp flash tool.

Download Vivo Y93 frp file including Vivo frp code, auth file, Da file, scatter file and follow the steps properly. :

vivo Y93 FRP File And Tool

Download Vivo Y93 FRP File Tested DOWNLOAD

 

Vivo Y93 USB Drivers Download
Vcom Drivers MTK

How To Bypass Vivo Y93 FRP Using Sp Flash Tool

As we already told you that Vivo y93 is MTK chipset based android smartphone, so we can use free sp flash tool to format or remove frp lock without error. Just use the correct Vivo Y93 DA File, Auth file and frp code with proper instructions.

  • First off install “VCOM drivers” or “MTK” drivers on windows pc. Skip the step, if already installed.
  • Download Vivo Y93 frp zip file and extract it on pc. Here you will see “sp flash tool”, “scatter file”, “Auth file” and “DA file” in one folder.

  • Launch “SP flash tool” as administrator.
  • Click on “choose” button and from “Download –agent” section and load “DA_PL_MT6762_0321.bin” file from extracted folder .
[Its must to load DA file. Otherwise, tool will show da file error ]

  • Now browse scatter file into scatter-loading section.

  • Same as above, click on “choose” button from “authentication file” and load “Auth file” from extracted folder.

  • Now click on “DOWNLOAD” button to start format process.
  • Power off device >> remove & re-insert battery >> plug USB cable
  • Tool will detect the device and it will format device to reset the device.
  • Pattern or PIN lock removed.

PLEASE NOTE: At this point, pattern lock removed from your device. If you want to remove FRP lock then continue the next step.

  • Unplug USB from device.
  • Navigate to “Format” tab >> select “manual Format flash” tab >> change the “Begin Address” & “Format Length” with below values as shown in screenshot.

  • Finally hit on “Play” button.
  • Now again “Remove & re-insert battery” >> ‘Plug USB cable” to start frp unlock process.
  • Tool will detect the device and it will remove frp lock within few seconds.
  • Done!!!!

Reboot the device again and setup it as a new device. This time it will not ask you to enter existing Google ID and password. That means, frp removed from vivo y93 using Sp flash tool.

Till now getting any issue in any step to bypass Vivo Y93 frp lock using Sp flash tool, please let me know by leaving your comment.

1 thought on “How To Bypass Vivo Y93 FRP Using Sp Flash Tool

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.