How To Use Read Write Tool

How To Use Read Write Tool [WRTool] To Flash IMEI Of MTK ,Qualcomm,SpreadTrum

Android

Here in this post we will show you “how to use Read write tool to flash IMEI number of MTK, Qualcomm and SpreadTrum android devices?

   By using read write tool [Wrtool] you can flash new IMEI number or can repair null imei or remove invalid IMEI number without root.wrtool is a simple IMEI number flashing tool for all MTK ,Qualcomm,SpreadTrum chipset based android phone.

Before using Read&Write tool [WRTOOL] make sure you are using MTK, Qualcomm or SpreadTrum chipset based android phone.if you don’t know about your phone chipset then do google for it or can download CPU-Z app from play store. After installation open the app and you will see complete detail of your phone.

Download WR Tool [Read&Write Tool]

ReadnWrite_Tool_v1.3.zip

ReadnWrite_Tool_v1.1.zip

How To Use Read&Write Tool [wrTool] To Flash IMEI

As I told you wrtool works on all MTK, , Qualcomm and SpreadTrum android devices.but don’t forget to install your phone’s USB driver. wrTool will not work if USB drivers are not installed properly.

Watch Video – Repair Null IMEI In Micromax A092

imei-wr-tool-files

  • Now run the WRTool.exe file

wr-tool-setup

  • Now following screen will be open in front of you.

wrtool

  • Now click on “file” and select “config” option as shown in screenshot.

wrtool-setup

  • Now you will see the following screen on pc.

read-write-tool-setup

  • Now click on “PlatefarmCongig” option and select your phone chipset [ for ex- if you are using MTK android phone then select MTK .if it’s a Qualcomm then select Qualcomm or if it’s a SpreadTrum android device then select SpreadTrum ]




change-imei

  • Now in “COMPORT” section select “USB”.

imei-changer

  • Now under the “DatafileConfig” section select “BP database file” and “AP data Base File” from your Phone stock ROM .its only for MTK android phone.if you are using Qualcomm device then no need to use this section ,

mtk-imei-change

  • Click on IMEI1 & IMEI2 option if you are using Dual sim android phone and then click on “OK” Button.

change-imei-number

  • Now type the IMEI number in both section and hit enter on “WRITE” button.

how-to-use-wrtool

  • if you will see port error that means usb drivers are not installed properly.if everything is ok then process will start and you will see a green “PASS” message on the top.

flash-imei

  • Now dial *#06# and you will see new imei number on your qualcomm android phone.

This is all about how to use Read & Write Tool [WRTool] to flash IMEI number of MTK ,Qualcomm,SpreadTrum android phone.

Incoming search

how to use read & Write tool

how to use wrtool

how to flash IMEI on qualcomm devices

how to flash imei on MTK devices

change IMEI using WRTool

7 thoughts on “How To Use Read Write Tool [WRTool] To Flash IMEI Of MTK ,Qualcomm,SpreadTrum

  1. Sir Read Write Tool [WRTool] mai hamra mobile agr MTK hoga tao hamay yai “BP database file” and “AP data Base File” kaha sy milay ga ,kia is ko hum downlaod karingy , agr downlaod karna hy tao kindly link b bata dai. THANKS

  2. hi dear i install driver of usb but it say port error and not work
    please help
    is mobile must be off or on recovery mode????
    please help me

    1. no need to boot into recovery mode.Just run the program,switch off your device and connect the phone with pc and press boot key.
      Boot Key – combination of power key and volume key…depend on your device

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.