Flash Itel A22 Pro Stock ROM With QFIL Tool [ FRP Unlock / Unbrick ]

Android Download Firmware other

Flash Itel A22 Pro Stock ROM With QFIL Tool [ FRP Unlock / Unbrick ]

100% working and tested method to flash official firmware on Itel A22 Pro with QFIL tool. In this guide, we will show the easiest method to flash Itel A22 Pro android mobile, which will fix all software related issue just in few minutes.

If you are Itel A22 Pro android Smartphone user and now getting any software related issues like auto reboot, hang on lock or device is bricked then install stock rom on Itel A22 Pro with QFIL / QPST tool. No need to use any professional tool like Miracle tool etc. Simple free QFIL tool is enough to flash software on Itel A22 Pro mobile.

Most probably, you may know that Itel A22 Pro is qualcomm chipset based android smartphone. So we have to use QUlacomm flash tool like QPST/QFIl tool. In any case, you are getting any issue or error to flash Itel A22 Pro using QFIL tool then you have to run QFIl tool through the QPST tool.

Don’t worry, In this tutorial, we will show all the steps with all necessary screenshots.

Download Itel A22 Pro Flash File, Drivers And Tool

Download Itel A22 Pro Stock ROM [ Flash File ]
Itel A22 Pro Stock ROM [ Flash File ] DOWNLOAD

 

Download Itel A22 Pro USB Drivers
Itel A22 Pro Drivers [ QUALCOMM] DOWNLOAD

 

Itel A22 Pro Flash Tool
QPST QFIL

How To Flash Itel A22 Pro Stock ROM Using QFIl Tool

Sometime it may possible, you will show error during firmware flashing with QFIL tool. To remove this QFIL tool error, we will use QPST tool to launch QFIL tool.

  • Extract the all downloaded files on pc. [ Drivers, QPST tool & Flash File]
  • Download and install Itel A22 Pro USB Drivers [ USB Drivers] on pc. It’s must to create bridge connection in between pc and device.
  • Download and install latest “QPST tool” by following on screen instructions.
  • Once the tool installed, follow the below path and run “QFIL” tool from QPST tool installation location.
My pC >> C Drive >> Program Files >> Qualcomm >> QPST >> bin >> QFIL Tool
  • Select the “Flat Build” option from the tool.

  • Click on browse button and load “prog_emmc_firehose_8909_ddr.mbn” file from extracted firmware folder.

  • Again click on “Load XML” option and select “rawprogram_unsparse_without_QCN” file form same flash file folder.

With QCN file will not wipe existing IMEI number of the device.

  • Just after above step, load “patch0.xml” file as shown below.
  • Come to the device and boot Itel A22 Pro into EDL mode by pressing boot key.

Itel A22 Pro Boot Key For EDL Mode :

Power Off Properly

Remove & Re-insert USB Cable For Once.

Press & Hold Volume Up + Down key + Insert USb Cable

  • If the device is properly connected with pc, you will see “qualcomm HS-USB QDLoader 9008 port” under the “Device Manger” section.

Qualcomm HS-USB QDLoader 9008

  • Tool will also show “Qualcomm HS USB QDloader 9008 port” at the top of tool. Just click on “DOWNLOAD” button to start flashing process.
  • Flashing may take long time to flash complete stock ROM. After flashing the rom, remove & re-insert battery and boot device again.

  • DONE!!! Flashing completed and this time it will fix all types of software related issue of Itel A22 Pro mobile.

In this way, you can flash itel a22 pro android smartphone using QFIL tool. It’s really very simple and easy for all newbie and professional. Just download Itel a22 pro android oreo stock rom, drivers, tool and follow the firmware installation process. That’s it.

Topics Covered In This Guide

  • how to install stock rom on Itel a22 pro mobile
  • Itel A22 Pro frp unlock by flashing firmware
  • flash Itel A22 Pro without box
  • fix Itel A22 Pro stuck at fastboot mode
  • Itel A22 Pro hang on logo
  • Itel A22 Pro dead recover

till now getting any issue in any step, please leave your comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.